Multiple Ways to ID Drivers - Push Button Key Fobs, RFID Cards, iButtons/Dallas Keys
Optional Starter Interrupt - Prevent Unauthorized Drivers from Starting a Vehicle
Use Your Existing RFID/HID Cards and Key Fobs!
Automatically identify drivers. We have miltiple solutions to match your requirements. Our system can alert you whenever an unauthorized driver attempts to start a vehicle.
Driver ID with a Push Button Key Fob
- Identify Drivers ID drivers with a multi-function key fob or a single push button key fob
- BLE-Enabled GPS Tracker scans for fobs within range (approx 50 ft) and reports every ID button push by driver
- Use with OBD Plug in GPS Trackers - nothing to install
- One small disadvantage - the GPS Tracker must configured to read all the fobs of "allowed" drivers. Therefore a button push by any "allowed" driver within range will be read and reported by the tracker. Simply ask drivers to move the vehicle 50 ft from another fleet vehicle before pushing the fob button.
- Prevent Unauthorized Use Identify unauthorized drivers of vehicles
- Block Ignition Ignition can be prevented for unauthorized drivers (device dependent)
- Accurate Time Reporting Know exactly when drivers start and end their day
- Auto Log Out Automatically log out drivers upon exceeding a defined stop interval
Driver ID with a RFID/HID Card and Card Reader
- Drivers tap their card on the reader
- Use our cards, or your own RFID or HID Cards
- Prevent Unauthorized Use Identify unauthorized drivers of vehicles
- Track Driver History See the driver history of every vehile
- Simplifies Timekeeping Reports start time, stop time, driving duration
Driver ID with Passive iButton or Dallas Key and iButton Reader
- Drivers tap their iButton/Dallas Key on a reader
- Prevent Unauthorized Use Identify unauthorized drivers of vehicles
- Block Ignition Ignition can be prevented for unauthorized drivers (device dependent)
- Accurate Time Reporting Know exactly when drivers start and end their day
- Auto Log Out Automatically log out drivers upon exceeding a defined stop interval
Driver ID with iBeacon
- BLE-Enabled GPS Tracker reads iBeacons within range (approx 50 ft)
- Driver does not need to do anything other than carry their iBeacon
- Use with OBD Plug in GPS Trackers - nothing to install
- One small disadvantage - the GPS Tracker must configured to read all the iBeacons of "allowed" drivers. There the iBeacon of any "allowed" driver coming within range will be read and reported by the tracker.
- Not recommended to use Starter Prevention with iBeacon method
- Prevent Unauthorized Use Identify unauthorized drivers of vehicles
- Track Driver History See the driver history of every vehile
- Simplifies Timekeeping Reports start time, stop time, driving duration